Roofing Accessories
Good quality tools are essential in the work of a roofer – without them his work would be at least significantly harder, if not impossible. In order to achieve the desired final result you need special equipment. The selection of appropriate accessories is the essential part in a roofer’s work. Professional roofing accessories are intended to facilitate and speed up all the works.

GS-1/14 Silicone heater bag

Practical storage bag for silicon heater GS-1/14. The bag  allows safe transportation of the heater and prevents it from bending.

Roofer’s bag

Lightweight, handy roofing bag which allows convenient and safe transport of heating torches and roof accessories to the place of work.

NEW! Pressure roller for asphalt – tar paper unroller – WR1/R

Roll coating made of special silicone

• roll diameter – 50 mm 
• pressure width – 90 mm

Pressure roller for asphalt – tar paper unroller – WR2/R

Universal rooflayers trowel.

• roll diameter – 30 mm 
• pressure width – 40 mm

Rooflayers trowel

Uniwersalna kielnia dekarska.

• length – 160 mm 
• width – 47 mm
• varnish-finished wooden, ergonomic handle

Pressure roller WR1
Manual pressing shaft, facilitating the pressing of heat-weldable roofing paper on welds. Necessary for roofing works.

• roll diameter – 50 mm
• pressure width – 90 mm 
• roll coating made of special silicone
• varnish-finished wooden handle

Pressure roller WR2

Manual pressing shaft, facilitating the pressing of heat-weldable roofing paper on welds. Necessary for roofing works.

• roll diameter – 30 mm
• pressure width – 40 mm 
• roll coating made of special silicone
• varnish-finished wooden handle

Pressure roller WR3
Manual pressing shaft, facilitating the pressing of heat-weldable roofing paper on welds. The use of steel joint allows to extend the shaft arm and to operate in straight body position. Necessary for roofing works.

• roll diameter – 50 mm 
• pressure width – 90 mm
• connector length – 80 cm
• roll coating made of special silicone
• varnish-finished wooden handle

Pressure roller W1

A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper.

• weight of pressure roller – 6,5 kg
• pressure width – 100 mm
• pressure roller made of polyamide
• costrustion made of stainless steel

Pressure roller W2

A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper..

• weight of pressure roller – 10 kg
• pressure width – 100 mm 
• pressure roller made of metal
• costrustion made of stainless steel

Pressure roller W3

A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper.

• weight of pressure roller – 3,5 kg
• pressure width – 100 mm
• pressure roller made of polyamide
• costrustion made of stainless steel

Asphalt-tar paper unrollers R4, R1, R1/00

Easy to us unrollers on felt applicators. Made of stainless steel for the highest durability and mechanical strength.

• lenght R1 R4 – 130 cm,
• lenght R1/0 – 43 cm
• costrustion made of stainless steel

Asphalt-tar paper unroller R3

Easy to usunroller on felt applicators. Made of stainless steel for the highest durability and mechanical strengt.

The R3 model is additionally fitted with two tarnamid-made rotating rollers for unrolling of roofing felt rolls.

• width – 74 cm 
• costrustion made of stainless steel

Trolley for one cylinder transportation WTB-1

Trolleys for 11 kg gas cylinders with 1 kg fire extinguisher. Rack for easy hose coiling and torch holder.

Trolley for transportation of two cylinders WTB-2

Trolley for transportation of two cylinders.

Trolley for transportation of two cylinders WTB-3

Trolley for transportation of three cylinders.

Quick coupling

Allows for quick and simple connection of the hose to the torch.

Propane hose – KOMA

KOMA-line propane-butane rubber hose with nipple G 3/8 LH . Compatible with professional KOMA and SPECJAL roofing torches. Connected to a gas pressure regulator.

Standard length : 3m, 5m, 10m (non- standard length-on customer’s request).

The offer also includes KOMA/S model with a hose bend restrictor.

• nipple G3/8LH
• standard lenght 3m 5m 10m 
• non-standardlength -on customers’ request

Propane hose – OPTIMA

Wąż gumowy typu OPTIMA do propanu z przyłączami G3/8 LH i W21,8LH. Przystosowany do linii palników OPTIMA. Podłączany bezpośrednio do butli gazowej.

Standardowe długości : 3m, 5m, 10m (niestandardowe- zgodnie z życzeniem klienta)

W ofercie dostępny model OPTIMA/S z odgiętką sprężystą zapobiegającą łamaniu węża.

• nipples G3/8LH and W21,8LH
• standard lenght 3m 5m 10m
• non-standardlength -on customers’ request

Cylinder connector LB-3

Cylinder connector allows for gas supply from three cylinders simultaneously.

• nipples W 21,8 LH
• hose lenght 2×70 cm

Cylinder connector LB-2

Cylinder connector allows for gas supply from two cylinders simultaneously.

• nipples W 21,8 LH • hose lenght 70 cm
Cylinder pressure regulator for propane M50-V/STT

The gas pressure regulator reduces a process gas (PROPANE/BUTANE) pressure.

Type 50V/ST gas pressure regulator is a stem-type pressure regulator for variable outlet pressure adjustment. Reducing gas pressure at the cylinder outlet to a required outlet pressure (working) and maintaining continuous pressure by compensating changes in inlet pressure. Safety valve cutting off gas flow in case of the pressure loss due to a hose damage.

• ciśnienie robocze – 0,05 ÷ 0,4 MPa
• przepustowość – do 12 kg/h
• wejście – W 21,8 x 1/14” LH
• wyjście – G 3/8 LH  

Cylinder pressure regulator for propane 912 LT

The gas pressure regulator reduces a process gas (PROPANE/BUTANE) pressure.

Typ 912L gas pressure regulator is a stem-type pressure regulator for variable outlet pressure adjustment. Reducing gas pressure at the cylinder outlet to a required outlet pressure (working) and maintaining continuous pressure by compensating changes in inlet pressure. Safety valve cutting off gas flow in case of the pressure loss due to a hose damage.

• working pressure – 0,05 ÷ 0,4 MPa
• flow capacity– to 12 kg/h 
• inlet – W 21,8 x 1/14” LH
• outlet – G 3/8 LH

Connector LP-2

Enables operation of two burners, connected to a single cylinder.