Wheeled burners

Burners intended for heat-sealing of tar paper

Seven-nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll WP6/7

Seven -nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll. The set includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. The flexible bend protection mounted on the hose prevents the bending of the hose and prolongs its lifetime. Externally mounted aluminium wheels.

• heat power – 140 kW*
• gas consumption – 10.8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm


* at 0.4 MPa pressure

Seven-nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll WP7

Seven -nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll. The set includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. The flexible bend protection mounted on the hose prevents the bending of the hose and prolongs its lifetime.The inside positioning of wheels enables the roofing felt to be laid along the edge of the surface.

WP7 Heating torch types:
A – Asphalt-tar paper unroller – 2 kg**
B – Asphalt-tar paper pressure unroller WD1 – 5,5 kg**/***
C – Asphalt-tar paper pressure unroller filled with sand WD2  – 14 kg**

** weight of the asphalt-tar paper pressure unroller 
*** Weight of the asphalt-tar paper pressure unroller filled with sand

• heat power – 140 kW*
• gas consumption – 10.8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm


* at 0.4 MPa pressure

Seven-nozzle wheeled heating torch W7

Seven -nozzle wheeled heating torch  includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. Externally mounted aluminium wheels.

• heat power – 140 kW*
• gas consumption – 10.8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm


* at 0.4 MPa pressure

Palniki do odkażania

Ten-nozzle burning torch WK10

The WK10/D4 burner is a multi-nozzle burner (10 diffusers) intended for burning (disinfection) of flat surfaces (e.g. poultry houses). It is powered by gaseous propane or propane-butane. In order to achieve higher temperatures and more stable flame it is recommended to additionally connect a compressed air supply. The WK10/D4 burner consists of a 10-nozzle trailer, , a 10 m hose and a regulator fitted with a fuse which allows for regulating gas pressure in the range between 1 and 4 bar.

Bez nazwy-1
Play Video

• diffuser – ∅ 50 mm (x10)
• heat power – 145 kW (without compressed air feed)
• gas consumption: 10,8 kg/h*
• length between terminal diffusers- 1500 mm
• max.temperature: – without compressed air feed 700°C – with additional compressed air feed 1050°C

* at 0,4 MPa pressure

Ten-nozzle burning torch with module WK10/D3

The WK10/D3 burner is a multi-nozzle burner (10+3 diffusers) intended for burning (disinfection) of flat surfaces (e.g. poultry houses). It is powered by gaseous propane or propane-butane. In order to achieve higher temperatures and more stable flame it is recommended to additionally connect a compressed air supply. The WK10/D3 burner consists of a 10-nozzle trailer, a 3-nozzle module intended for disinfecting side walls, a 10 m hose and a regulator fitted with a fuse which allows for regulating gas pressure in the range between 1 and 4 bar. The D3 module may be used as an extension of the collector with diffusers.

Bez nazwy-1
Play Video

• diffuser – ∅ 50 mm (x10+3)
• heat power – 145 kW (without compressed air feed)
• gas consumption: 10,5 kg/h*
• length between terminal diffusers- 1950 mm
• max.temperature: – without compressed air feed 700°C – with additional compressed air feed 1050°C

* at 0,4 MPa pressure

Cylinder heaters
Cylinder connectors