Wheeled heating torches

Wheeled burners can be used on large, flat surfaces. They are mainly used for heat-sealing of tar paper on bridges and viaducts.

WP7/KP

WP7/KP

Seven-nozzle heating torch with asphalt-roofing paper unroll (without wheels) WP7/KP

Seven -nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll. Asphalt-roofing paper unroll can be additionally filled with sand (increased weight results in better pressing of the tarmac to the ground). The set includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. The flexible bend protection mounted on the hose prevents the bending of the hose and prolongs its lifetime.

• heat power – 140 kW*
• gas consumption – 10,8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm

* at 0,4 MPa pressure

 
WP6/7

WP6/7

Seven-nozzle wheeled heating torch

with extension arm for asphalt-tar paper unroll WP6/7

Seven -nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll. The set includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. The flexible bend protection mounted on the hose prevents the bending of the hose and prolongs its lifetime. Externally mounted aluminium wheels.

• heat power – 140 kW*
• gas consumption – 10,8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm

* at 0,4 MPa pressure

 
WP7

WP7

Seven-nozzle wheeled heating torch

with extension arm for asphalt-tar paper unroll WP7

Seven -nozzle wheeled heating torch with extension arm for asphalt-tar paper unroll. The set includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. The flexible bend protection mounted on the hose prevents the bending of the hose and prolongs its lifetime.The inside positioning of wheels enables the roofing felt to be laid along the edge of the surface.

• heat power – 140 kW*
• gas consumption – 10,8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm

* at 0,4 MPa pressure

 
W7

W7

Seven-nozzle wheeled heating torch W7

Seven -nozzle wheeled heating torch  includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. Externally mounted aluminium wheels.

• heat power – 140 kW*
• gas consumption – 10,8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 1 050 mm

* at 0,4 MPa pressure

 
W4

W4

Four -nozzle wheeled heating torch W4

Four-nozzle wheeled heating torch  includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. Externally mounted aluminium wheels.

• heat power – 140 kW*
• gas consumption – 10,8 kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 630  mm

* at 0,4 MPa pressure

 
W4-0

W4-0

Four -nozzle wheeled heating torch directed

W4-0

Four-nozzle wheeled heating torch directed  includes a 10 m KOMA hose (G3/8LH) and a M50V/ST gas regulator. The 50 mm seven diffusers  are made of stainless steel. The professional handle is fitted with a locking mechanism for constant operation. It is made of durable plastic with high resistance to mechanical damage and high temperatures. Externally mounted aluminium wheels.

 

• heat power – 140 kW*
• gas consumption – 10,8  kg/h*
• diffuser- ∅ 50 mm (x7)
• wheel base – 630  mm

* at 0,4 MPa pressure

 
WK10

WK10

Ten-nozzle burning torch WK10

The WK10/D4 burner is a multi-nozzle burner (10 diffusers) intended for burning (disinfection) of flat surfaces (e.g. poultry houses). It is powered by gaseous propane or propane-butane. In order to achieve higher temperatures and more stable flame it is recommended to additionally connect a compressed air supply.

The WK10/D4 burner consists of a 10-nozzle trailer, , a 10 m hose and a regulator fitted with a fuse which allows for regulating gas pressure in the range between 1 and 4 bar.

 

• diffuser – ∅ 50 mm (x10)
• heat power – 145 kW* (without compressed air feed)
• gas consumption: 10,8 kg/h*
• length between terminal diffusers- 1500mm
• max.temperature:
– without compressed air feed 700°C
– with additional compressed air feed 1050°C

* at 0,4 MPa pressure

 
WK10/D4

WK10/D4

Ten-nozzle burning torch with module WK10/D4

The WK10/D4 burner is a multi-nozzle burner (10+4 diffusers) intended for burning (disinfection) of flat surfaces (e.g. poultry houses). It is powered by gaseous propane or propane-butane. In order to achieve higher temperatures and more stable flame it is recommended to additionally connect a compressed air supply.

The WK10/D4 burner consists of a 10-nozzle trailer, a 4-nozzle module intended for disinfecting side walls, a 10 m hose and a regulator fitted with a fuse which allows for regulating gas pressure in the range between 1 and 4 bar.

The D4 module may be used as an extension of the collector with diffusers.

 

 

• diffuser – ∅ 50 mm (x10+4)
• heat power – 145 kW* (without compressed air feed)
• gas consumption: 10,5 kg/h*
• length between terminal diffusers- 1500mm
• max.temperature:
– without compressed air feed 700°C
– with additional compressed air feed 1050°C

* at 0,4 MPa pressure