Roofing Accessories
Good quality tools are essential in the work of a roofer – without them his work would be at least significantly harder, if not impossible.
In order to achieve the desired final result you need special equipment. The selection of appropriate accessories is the essential part in a roofer’s work. Professional roofing accessories are intended to facilitate and speed up all the works.
NEW!
Pressure roller WR3
Manual pressing shaft, facilitating the pressing of heat-weldable roofing paper on welds. The use of steel joint allows to extend the shaft arm and to operate in straight body position. Necessary for roofing works.
Specification:
• roll diameter – 50 mm
• pressure width – 90 mm
• connector length - 80 cm
• roll coating made of special silicone
• varnish-finished wooden handle
Pressure roller W1
A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper.
Specification:
• weight of pressure roller – 6,5 kg
• pressure width – 100 mm
• pressure roller made of polyamide
• costrustion made of stainless steel
Pressure roller W3
A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper.
Specification:
• weight of pressure roller – 3,5 kg
• pressure width – 100 mm
• pressure roller made of polyamide
• costrustion made of stainless steel
Pressure roller W2
A manual roller for easy application of a torch on felt. Guarantees required bitumen mastic flow along the lengthwise lap edge of the felt paper.
Specification:
• weight of pressure roller – 10 kg
• pressure width – 100 mm
• pressure roller made of metal
• costrustion made of stainless steel
Asphalt-tar paper unroller R3
Easy to usunroller on felt applicators. Made of stainless steel for the highest durability and mechanical strengt.
The R3 model is additionally fitted with two tarnamid-made rotating rollers for unrolling of roofing felt rolls.
Specification:
• width – 74 cm
• costrustion made of stainless steel
Roofer’s bag
Light,handy and specially profiled the bag – ensures safe , comfortable and organized transportation of torches and the necessary accessories. One big compartment will accommodate the longest of torches and the workwear while the three smaller side pockets are designed to carry roofer’s accessories.
Propane hose – KOMA
KOMA-line propane-butane rubber hose with nipple G 3/8 LH . Compatible with professional KOMA and SPECJAL roofing torches. Connected to a gas pressure regulator.
Standard length : 3m, 5m, 10m (non- standard length-on customer’s request).
The offer also includes KOMA/S model with a hose bend restrictor.
Specification:
• nipple G3/8LH
• standard lenght 3m 5m 10m
• non-standardlength -on customers’ request
Propane hose - OPTIMA
OPTIMA rubber hose for propane gas with G3/8 LH and W21.8 LH connectors. Compatible with OPTIMA roofing torches. Connected directly to a gas cylinder.
Standard length : 3m, 5m, 10m (non- standard length-on customer’s request).
The offer also includes OPTIMA/S model with a hose bend restrictor.
Cylinder pressure regulator for propane
M50-V/ST
The gas pressure regulator reduces a process gas (PROPANE/BUTANE) pressure.
Type 50V/ST gas pressure regulator is a stem-type pressure regulator for variable outlet pressure adjustment. Reducing gas pressure at the cylinder outlet to a required outlet pressure (working) and maintaining continuous pressure by compensating changes in inlet pressure. Safety valve cutting off gas flow in case of the pressure loss due to a hose damage.
Specification:
• flow capacity- do 12 kg/h
• inlet - W 21,8 x 1/14” LH
• outlet – G 3/8 LH
Cylinder pressure regulator for propane 912 L
The gas pressure regulator reduces a process gas (PROPANE/BUTANE) pressure.
Typ 912L gas pressure regulator is a stem-type pressure regulator for variable outlet pressure adjustment. Reducing gas pressure at the cylinder outlet to a required outlet pressure (working) and maintaining continuous pressure by compensating changes in inlet pressure. Safety valve cutting off gas flow in case of the pressure loss due to a hose damage.
Specification:
• flow capacity- do 12 kg/h
• inlet - W 21,8 x 1/14” LH
• outlet – G 3/8 LH